Innovative - Unique - FLEXIBLE LED NEON - NO GLASS -
NO GAS - NO HIGH VOLTAGE ! - BENDABLE - VERY LONG LIFE

AVALIABLE IN RED, YELLOW/AMBER, GREEN, WHITE,  BLUE, AND ORANGE.

 ULTRA BRIGHT LED’S ARE SPACED EVERY 1/2” THE DIFFUSER BLENDS THE LIGHT EMMITTED INTO A BEAUTIFUL FLEXIBLE TUBE THAT
IS VERY ADAPTABLE TO BENDS AND CURVES. IF YOU BEND THE TUBE ONTO ITSELF, THE GAP BETWEEN THEM IS ONLY 3/4”

PRODUCT IS JUST NOW BEING INTRODUCED, PRICING RANGES FROM $14.50 TO $66.09 A FOOT,
PRICES VARY DEPENDING UPON COLOR AND QUANITY ORDERED.
IF YOU THINK THIS PRODUCT WILL FILL YOUR NEEDS, GIVE US A CALL TO TALK ABOUT
AVAILABILITY AND ADDITIONAL INFORMATION.

Neon presents complicated installation, fragile nature of the glass, potentioal shock hazard, high maintenance & high
power consumption. “Bendable Neon” removes the problems - easy installation, impact resistant to 200 psi, operates on
24 Vold or 120 volds, lasts 100,00 hours, and has very low power consumption.

The light source is a string of light emitting diodes (LED’s) spaced a distance apart sufficient to permit the light emitted by
each point into a special oval shaped encapsulated jacket. It provides the uniformity and neon-like brightness. Ass this and
it is bendable!

SPECIFICATONS

Colors:  Available in Red, Yellow/Amber, Orange, Green, White, and Blue

Dimensions:  1/2” Wide and 1” Tall

Power Consumption:

     24 Volt: 2.88 Watts/ Ft.  All Colors

     120 Volt: 1.92 Watts/Ft. Red and Yellow/Amber
                     2.40 Watts/Ft. Blue and Green

Maximum Length of Single Run

     24 Volt:  50 Linear Feet

   120Volt: 300 Lenear Feet

Cutting Length:

24 Volt: Every 4 inches on Red & Yellow/Amber
             Every 3 Inches on Blue & Green

120 Volt Every 2.5 Feet on Red & Yellow/Amber
             Every 1.5 Feet on Blue & Green

Life Expectancy: LEDs Rated at 100,000 hours.

                                             ENERGY COMPARISON - OPERATIONG COSTS

                                             Based Upon 300 Feet of Red Neon verses LED Flex Neon


Region Glass Neon LED Flex Neon Annual Savings Cumulative Saving Midwest $.08kWh $1839.60 $605.40 $1234.20 $12,342.00 (10 Years)






                                                                       

     PRICING

Pricing is dependent upon quanity needed.  The following figures will give you an idea of cost. 
The costs represent the length of LED Flex Neon, assembled, and tested.  For 24 volts, you will need a 120/24V
transformer, for 120 volt, it just needs to be plugged in.

 
 

Power Cord With Converter  $9.75
End Cap $.95
Monting Clip $2.25

If you have a project or see the outstanding value of using FLEX NEON, contact us and give us
the opportunity to provide you with a quotation

ACCESSORIES: Extra power cords, and caps, inside and outside L connectors, T connectors availiable.
Also 2” mounting clips.